Removing And Installing The Master Cylinder - Skoda FABIA II 2007 Workshop Manual

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02R - Edition 08.2014
– Remove the slave cylinder from the gearbox last, - do not open
the line system - and check the collar for brake fluid leak.
– To do so, take off the collar from the tappet -arrow-.
1.17 Removing and installing the master cyl‐
inder (Fabia II 2007 ►; Roomster 2006
►)
Special tools and workshop equipment required
♦ Pliers - T10005-
♦ Polycarbamide grease - G 052 142 A2-
Removing
Note
After the battery earth strap is disconnected and re-connected,
carry out additional operations ⇒ Electrical System; Rep. gr. 27 .
– Remove engine cover ⇒ engine; Rep. gr. 10 .
– Remove battery ⇒ Electrical System; Rep. gr. 27 .
– Remove air filter ⇒ Engine; Rep. gr. 23 .
– Lay a cloth under the master cylinder.
– Using an extraction bottle extract as much brake fluid as pos‐
sible from the brake fluid reservoir.
48