Skoda FABIA II 2007 Workshop Manual page 910

❑ ⇒ "2.3 Inspecting and adjusting the selector lever control cable", page 55
❑ ⇒ Fig. ""Remove the shift mechanism together with the selector lever control cable from the shift hous‐
ing"" , page 45
5 - Screw
❑ 8 Nm
6 - Shift housing with gasket
❑ ⇒ Fig. ""Remove the shift mechanism together with the selector lever control cable from the shift hous‐
ing"" , page 45
7 - Nut
❑ 4 pieces
❑ 25 Nm
8 - Gearshift lever
9 - Cable support
❑ for selector lever control cable
10 - Screw
❑ for cable support to gearbox
❑ 2 pieces
❑ 23 Nm
11 - Selector lever control cable
❑ when installing in the vehicle, clamp on the gearbox side with the fixing part to the heat shield of the
exhaust system
❑ The selector lever control cable must not be separated from the shift mechanism Pos. 3, it must be
removed together as one component part ⇒ Electronic Catalogue of Original Parts.
❑ Do not grease selector lever control cable
❑ ⇒ Fig. ""Remove the shift mechanism together with the selector lever control cable from the shift hous‐
ing"" , page 45
❑ ⇒ "2.3 Inspecting and adjusting the selector lever control cable", page 55
12 - Support
❑ for selector lever control cable
13 - Nut
❑ for holder Pos. 12 at gearbox
❑ 13 Nm
Remove the shift mechanism together with the selector lever con‐
trol cable from the shift housing
Remove the shift mechanism -A- together with the selector lever
control cable -C- from the shift housing -B- in
-direction of arrow-. To do so, unscrew 4 screws Pos. 5 (fig.
S37-10007) from the shift housing
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
⇒ Item 5 (page 45)
Gearbox 09G - Edition 07.2014
.
2. Repairing shift mechanism
45