FABIA II 2007 ➤
Gearbox 02R - Edition 12.06
– Swivel out the gearbox further and carefully lower it.
– Screw down the gearbox in the area of the 5th gear (sheet
metal cover) via the spindles of the gearbox mount -3282- .
The gearbox must not touch the engine pump aggregate -A- for
the power-assisted steering.
– Change the gearbox position at the spindles of the gearbox
mount -3282- when lowering.
Note
Pay attention to the coolant hose between the engine and the
♦
heat exchanger for heating.
When removing and installing, pay attention to the charge air
♦
pipe on the gearbox side of the engine ⇒ Engine ⇒ Rep. Gr.
21 .
The engine cradle must not touch the toothed belt guard - top
♦
part ⇒ Engine ⇒ Rep. Gr. 26 .
– Installing the gearbox
2.3
Installing the gearbox
The installation of the gearbox occurs in reverse order. Observe
the stress-free assembly bracket in the vehicle.
80
Rep. Gr.34 - Control, housing
⇒ page 80
.