Repair Instructions - Skoda FABIA II 2007 Workshop Manual

2.2

Repair instructions

Scrupulous care and cleanliness as well as the proper tools are
essential requirements for carrying out proper and successful
gearbox repairs. Obviously, the generally valid basic safety rules
apply to repair work.
A number of generally valid notes for individual repair operations
- which are otherwise listed several times at numerous points in
the workshop manual - are summarized here. They apply to this
workshop manual.
Gearbox
♦ Each time a gearbox is installed, basic settings are required.
♦ Do not run the engine or tow the vehicle when the oil pan of
the gearbox has been removed or without ATF filling.
♦ If the automatic gearbox is replaced, check ATF level if nec‐
essary top up with ATF
specifications ⇒ "1.3 Contents", page 10
♦ Secure the torque converter against dropping out when the
gearbox is removed.
♦ Thoroughly clean the connection points and their surroundings
before releasing.
♦ Place removed parts on a clean surface and cover. Use foil
and paper. Do not use fuzzy cloths!
♦ Carefully cover or close opened components if the repair is not
completed immediately.
♦ Only install clean parts. Remove spare parts from their wrap‐
ping immediately before fitting.
♦ Before installing the gearbox check the fitting position of the
torque converter
⇒ "1.4 Installing the torque converter", page 18
♦ When installing, take care with the correct positions of dowel
sleeves in the engine.
The ATF filler tube -arrow- is no longer available on gearboxes
as of production date 06.2006.
O-rings, gasket rings, gaskets
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
⇒ "4 ATF", page 147 . Capacities and
.
2. Information and repair instructions for the automatic gearbox 09G
Gearbox 09G - Edition 07.2014
.
13