Control, Housing; Electric/Electronic Components And Fitting Locations - Skoda FABIA II 2007 Workshop Manual

37 –

Control, housing

1 Electric/Electronic components and
fitting locations
1.1

Electric/Electronic components and fitting locations

1 - Automatic gearbox control
unit -J217-
❑ Fitting location and re‐
moving and installing
⇒ page 16
❑ Control unit is checked
by self-diagnosis
2 - Diagnostic connection
❑ Fitting location: Cover in
driver's footwell
⇒ page 12
3 - Selector lever lock solenoid
-N110-
❑ Fitting location
⇒ page 13
❑ removing and installing
⇒ page 17
❑ is checked by self-diag‐
nosis
4 - Slide valve body
❑ Fitting location
⇒ page 13
❑ removing and installing
⇒ page 58
❑ Marking of solenoid
valves ⇒ page 55
5 - Wiring loom with 8-pin plug
and integrated gearbox oil
temperature sender -G93-
❑ Fitting location: Wiring
loom is fixed to the slide
valve body ⇒ page 13
❑ Gearbox oil tempera‐
ture sender -G93- is
checked by self-diagnosis
❑ removing and installing
6 - Wiring loom with 14-pin plug
❑ for solenoid valves and gearbox sensors
❑ Fitting location: Wiring loom is fixed to the slide valve body
❑ Identification of solenoid valves and wiring loom routing
❑ removing and installing
7 - Multi-function switch -F125-
❑ Fitting location ⇒ page 14
❑ is checked by self-diagnosis
❑ removing and installing
Automatic 6-speed gearbox 09G - Edition 05.07
⇒ page 71
⇒ page 69
⇒ page 75
⇒ page 13
⇒ page 55
1. Electric/Electronic components and fitting locations
FABIA II 2007 ➤
11