Removing And Installing Shift Mechanism - Skoda FABIA II 2007 Workshop Manual

Always replace retaining clip -arrow- ⇒ Electronic Catalogue of
Original Parts .
Note
When inserting the plug connection ensure that the contact pins
of the circuit board are not bent and that the retaining lugs of the
cover do not break off.
2.5 Removing and installing shift mecha‐
nism
Removing shift mechanism
WARNING
Observe measures when disconnecting and connecting the
battery ⇒ Electrical System ⇒ Rep. Gr. 27 .
– Disconnect the battery-earth strap with the ignition off ⇒ Elec‐
trical System ⇒ Rep. Gr. 27 .
– Removing the cover for the shift mechanism
– Remove centre console ⇒ Body Work ⇒ Rep. Gr. 68 .
– Separate plug connections -A- and -B-.
– Remove engine cover.
– Disconnect plug from automatic gearbox control unit -J217- .
– Remove battery and battery tray ⇒ Electrical System ⇒ Rep.
Gr. 27 .
– Remove intake hose ⇒ Engine ⇒ Rep. Gr. 24 .
– Lever off the selector lever control cable -1- from the gearshift
shaft lever -3- e.g using an open-end wrench -2-.
– Press together the catches at the cable support of the selector
lever control cable -arrows- and pull out the selector lever
control cable from the cable support/gearbox.
Automatic 6-speed gearbox 09G - Edition 05.07
⇒ page 26 .
FABIA II 2007 ➤
2. Repairing shift mechanism
27