Adjusting The Differential Gear - Skoda FABIA II 2007 Workshop Manual

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02R - Edition 08.2014
Fitting position of thrust washer for the conical ring -1-
The collar -arrow- points towards the pressure spring -B-.
The lands -A- are available on certain gearboxes.
The lands -A- point towards the conical ring -1-.
2.2

Adjusting the differential gear

Special tools and workshop equipment required
♦ Gauge block plate - MP3-405/17-
♦ Pressure plate - MP3-407 (VW 402)-
♦ Universal dial gauge holder - MP3-447 (VW 387)-
♦ Pressure spindle - MP3-448 (VW 408 A)-
♦ Thrust plate - MP3-464 (30-205)-
♦ Thrust piece - MP3-468 (2007)-
♦ Bushing - MP3-474 (3144)-
♦ Interior extractor 46 up to 58 mm , e.g. -Kukko 21/7-
♦ Countersupport e.g. -Kukko 22/2 -
♦ Dial gauge
The differential gear must be re-set when the following compo‐
nents are replaced:
♦ Gearbox housing
♦ Clutch housing
♦ Differential gear housing
or the
♦ Tapered-roller bearings of the differential gear
Setting overview ⇒ "3 Setting overview", page 205
202
Rep. gr.39 - Final drive - differential
.