Note
Summary of components - Hydraulics
♦
⇒ "1.14 Summary of components - Hydraulic (Fabia II ►; Roomster ►; Rapid NH) ", page 41
After the battery earth strap is disconnected and re-connected, carry out additional operations ⇒ Electrical
♦
System; Rep. gr. 27 .
Grease all bearing points and contact surfaces with Polycarbamide Grease - G 052 142 A2- .
♦
Prior to working on the foot controls remove the storage area on the driver's side ⇒ Body Work; Rep. gr.
♦
70 .
1 - Front wall
❑ with mount for bearing
bracket and master cyl‐
inder
2 - Gasket
❑ always replace ⇒ Elec‐
tronic Catalogue of
Original Parts
3 - Bearing bracket
❑ for attaching clutch ped‐
al
4 - Screw
5 - Gas/brake foot controls
6 - 25 Nm
❑ self-locking
❑ for bracket on front wall
❑ always replace ⇒ Elec‐
tronic Catalogue of
Original Parts
7 - Clutch pedal switch - F36-
❑ Difference between
clutch pedal switch
⇒ page 13
❑ Assignment ⇒ Electron‐
ic Catalogue of Original
Parts
❑ Removing and installing
⇒ "1.1.1 removing and
installing, setting angu‐
lar clutch pedal switch
F36 ", page 13
angular
clutch pedal switch
❑ Removing and installing
⇒ "1.1.2 removing and installing, setting cylindrical clutch pedal switch F36 ", page 13
pedal switch
8 - Over-centre helper spring
❑ removing and installing
⇒ "1.3 Removing and installing the over-centre helper spring (Fabia II 2007 ►; Roomster 2006 ►)", page
14
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02R - Edition 08.2014
1. Clutch control
.
cylindrical clutch
11