Removing And Installing The Gearbox - Skoda FABIA II 2007 Workshop Manual

– Remove lock washer -arrow 1- for shift cable from gearbox
shift lever -A-.
– Pull off shift cable from the stud.
Metal relay lever (up to 05.07)
– Remove circlip -arrow 2- for selector cable from relay lever
-B-.
– Pull selector cable off the stud.
– Detach circlip -arrow 3- from the relay lever -B- and remove
relay lever.
Note
Always replace circlips ⇒ Electronic Catalogue of Original Parts
Plastic relay lever
• Before removal, the cable lock must be separated from the
selector cable in order to avoid damage to the selector cable.
– Pull forward the locking mechanism as far as the stop in
-direction of arrow 1-, then lock by turning to the left in
-direction of arrow 2-.
– Remove relay lever together with cable lock
⇒ "1.9 Plastic relay lever as of 06.07 (Fabia II, Roomster, Rap‐
id NH)", page 77 .
Continued for all vehicles:
– Remove the gearshift lever -A-, for this step unscrew nut
-arrow 4-.
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02R - Edition 08.2014

2. Removing and installing the gearbox

91