Remove And Install Shift Mechanism (Fabia Ii, Roomster, Rapid Nh) - Skoda FABIA II 2007 Workshop Manual

Relay lever with clip
– Remove clip -arrow°1-.
– Carefully take the relay lever together with the cable lock out
of its bearing point.
Continued for all versions
• Only remove cable lock on removed relay lever
Install
Note
Before installing, grease bearing points and friction surfaces with
grease - G 000 450 02- .
– Press cable lock onto the relay lever
– Insert relay lever together with cable lock up to the stop in its
bearing point.
• The cable lock must be located behind the catch -arrow 2-.
• The pin detent or the clip -arrow 1- secures the relay lever.
Lever off cable lock for selector cable from plastic relay lever
• Relay lever removed.
– Position a cross-head screwdriver -A- between bushing -B-
and relay lever.
Press on cable lock
• Relay lever removed.
• The cable lock must only be pressed onto the bushing
-arrow-.
• Cable lock must move freely on relay lever.
• The cable lock must be located behind the pin detent
⇒ page 89 .
1.10 Remove and install shift mechanism
(Fabia II, Roomster, Rapid NH)
Special tools and workshop equipment required
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
⇒ page 89
Gearbox 02T - Edition 05.2014
⇒ page 89 .
.
89
1. Shift mechanism