Dismantling And Assembling The Gearshift Mechanism - Summary Of Components - Skoda FABIA II 2007 Workshop Manual

FABIA II 2007 ➤
Automatic 6-speed gearbox 09G - Edition 05.07
– Release screw -2- at the front ball socket of the selector lever
control cable -1-.
– Tip selector lever in position "P" slightly to the front and to the
rear, however under no circumstances move out of "P" .
– Position the gearshift lever -3- at the gearbox in "P", i.e. push
the gearshift lever fully backwards against the direction of
travel.
Note
The locking lever must engage in parking gear, both front wheels
are blocked (cannot be simultaneously turned in one direction).
– Tighten screw -2- (13 Nm).
– Inspect gearshift mechanism
2.3 Dismantling and assembling the gear‐
shift mechanism - Summary of compo‐
nents
Note
Grease bearing and friction surfaces with grease -G 000 450 02- .
There is no mechanical ignition key anti-removal lock, but an
electrical anti-removal lock.
24
Rep. Gr.37 - Control, housing
⇒ page 22 .