Skoda FABIA II 2007 Workshop Manual page 802

Plastic relay lever
• In order to avoid damage at the selector cable, the cable locks
must be seperated from the selector cable before removal.
– Pull forward the locking mechanism as far as the stop in
-direction of arrow 1-, then lock by turning to the left in
-direction of arrow 2-.
– Remove relay lever together with cable lock
Continued for all vehicles
– Remove the gearshift lever -A-, for this step unscrew nut
-arrow 4-.
– Remove Bowden cable support -arrows-.
– Tie up shift cable and selector cable.
– Pull the tube-hose line -A- out of the bracket -B- (if present) on
the gearbox.
– Remove slave cylinder -B-, lay aside and secure with wire. Do
not open line system.
Note
Do not depress the clutch pedal.
Vehicles with petrol engines
⇒ page 63 .
FABIA II 2007 ➤
Gearbox 02T - Edition 12.06
2. Removing and installing the gearbox
75