Differential Gear; Disassembling And Assembling Differential Gear - Skoda FABIA II 2007 Workshop Manual

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02R - Edition 08.2014
2

Differential gear

⇒ "2.1 Disassembling and assembling differential gear",
page 196
⇒ "2.2 Adjusting the differential gear", page 202
2.1 Disassembling and assembling differen‐
tial gear
Special tools and workshop equipment required
♦ Counterholder - MP1-223 (3067)-
♦ Pressure plate - MP3-406 (VW 401)-
♦ Pressure plate - MP3-407 (VW 402)-
♦ Pressure spindle - MP3-408 (VW 412)-
♦ Pipe section - MP3-409 (VW 418 A)-
♦ Drive bushing - MP3-427 (40-21)-
♦ Pressure spindle - MP3-448 (VW 408 A)-
♦ Thrust piece - MP3-459 (VW 473) -
♦ Thrust plate - MP3-464 (30-205)-
♦ Thrust plate - MP3-467 (40-105)-
♦ Thrust piece - MP3-468 (2007)-
♦ Bushing - MP3-474 (3144)-
♦ Tapered-roller bearing extractor - V.A.G 1582-
♦ Gripper - V.A.G 1582/3-
♦ Interior extractor 46 up to 58 mm , e.g. -Kukko 21/7-
♦ Countersupport e.g. -Kukko 22/2-
Note
Before installing heat the inner ring of the tapered-roller bearing to 100°C.
♦
Replace both tapered-roller bearings together.
♦
Removing and installing differential gear
♦
⇒ "4.7 Mounting sequence - completely disassembling and assembling the gearbox", page 139
When replacing the tapered-roller bearings. the differential housing. the gearbox housing or the clutch
♦
housing. set the differential gear
196
Rep. gr.39 - Final drive - differential
⇒ "2.2 Adjusting the differential gear", page 202
.
.