Disassembling And Assembling The Gearshift Forks - Skoda FABIA II 2007 Workshop Manual

7 Disassembling and assembling the
gearshift forks
Special tools and workshop equipment required
♦ Driver -MP1-304 (10-206)-
♦ Pressure plate -MP3-407 (VW 402)-
♦ Thrust piece -MP3-448 (VW 408 A)-
♦ Pressure plate -MP3-453 (VW 431) -
♦ Pressure washer -MP3-455 (VW 447 H)-
♦ Distance sleeve -MP3-458 (VW 472) -
♦ Removal tool for inner lining of the door panel -MP8-602/1-
Note
The gearshift fork group with shift rails (Pos. 1) need not to be disassembled for the disassembly and assembly
of the shift segments, clamping plates and angular ball bearings.
1 - Gearshift fork group with
shift rails
2 - 3rd/4th gear shift segment
❑ Identification
⇒ page 106
❑ It must still be possible
to rotate the shift seg‐
ment freely once fitted.
3 - Angular ball bearing
❑ 4 pieces
❑ pressing off
⇒ page 107
❑ installing ⇒ page 107
4 - Circlip
❑ always replace ⇒ Elec‐
tronic Catalogue of
Original Parts
❑ removing ⇒ page 106
❑ installing ⇒ page 107
5 - 1st/2nd gear shift segment
❑ Identification
⇒ page 106
❑ It must still be possible
to rotate the shift seg‐
ment freely once the cir‐
clip has been fitted
❑ Gearshift fork with shift
segments
6 - 5th gear shift fork with shift
segments
❑ Shift segments are con‐
nected inseparably with
the gearshift fork
❑ Identification ⇒ page 106
Gearbox 02T - Edition 12.06

7. Disassembling and assembling the gearshift forks

FABIA II 2007 ➤
105