Skoda FABIA II 2007 Workshop Manual page 749

FABIA II 2007 ➤
Gearbox 02T - Edition 12.06
1.7.1 Removing and installing clutch pedal
switch -F36-
Note
The clutch pedal switch -F36- may only be installed once to en‐
sure that it has an adequately tight fit in the bracket.
Removing
– Remove the footwell vent ⇒ Heating, Air Conditioning ⇒ Rep.
Gr. 80 .
Note
The clutch pedal switch is installed from the front wall.
– Unplug connector from the clutch pedal switch -F36- .
– Turn the clutch pedal switch in the bracket by 45° in
-direction of arrow- and remove it from the support.
Install
• The bolt -A- of the clutch pedal switch must not be pulled out.
• Grease the bolt head -arrow-.
• Assign the grease via the ⇒ Electronic Catalogue of Original
Parts .
• When installing the clutch pedal switch the clutch pedal must
always remain in the off position. During the complete assem‐
bly, the clutch pedal must only be touched by means of the
bolt head -arrow- of the clutch pedal switch .
The clutch pedal switch is installed from the front wall.
– Insert the clutch pedal switch into the support on the bracket
and turn it by 45° in -direction of arrow-.
– Insert connector for the clutch pedal switch .
– Install the footwell vent ⇒ Heating, Air Conditioning ⇒ Rep.
Gr. 80 .
22