Removing And Installing Gearbox - Skoda Octavia Workshop Manual

OCTAVIA
Edition 03.99
S00.5116.56.20
Shift Mechanism/Housing
Removing and installing gear-
box
Special tools, testers and aids required
♦ Hose clamp MP 7-602
♦ Supporting device MP 9-200
♦ Gearbox mount 3282
♦ Adjusting plate 3282/2
♦ Transporting device MP 3-478
♦ Gearbox holder MP 3-501
Exchange components of ”shift el-
ement components”
What should be done first
Before removing the automatic gearbox, first of
all carry out a damage analysis with the aid of
Repair Group 01 Self-Diagnosis.
How do I obtain an exchange component
The exchange component -arrow- is assigned
to the gearbox on the basis of its code letters
and can be ordered in the same way as any
other Genuine Part.
What is an exchange component
An exchange component is a low-priced re-
placement part set. The parts list describes the
parts which are included with the exchange com-
ponent.
Adjustment operations
It is always necessary to set the clutch play when
installing an exchange component.
If not more than only two shims are fitted for
each brake (-B1- and -B2-), it is not necessary
to set the two brakes. They are then already
correctly set and can be installed directly after
being removed from their wrapping.
37
------------ 37-12.1 ------------