WAGO-I/O-SYSTEM 750
750-880 ETHERNET Programmable Fieldbus
6.
Select the driver "Serial (RS232) 3S Serial RS232 driver" and confirm your
input by clicking [OK].
Figure 49: New communication channel via USB
7.
Double-click on the address field COM1 in the column "Value" in the
"Communication parameters" dialog box. The field is highlighted in gray.
Press the [↓] or [↑] arrow to increase or decrease the COM port number by
8.
one. Adjust the COM port, which was previously identified in the Device
Manager (in this example "COM3"), accordingly in the Communication
Parameters.
You can leave all other parameters (Baudrate, Parity, Stop bits, Motorola
byteorder, Flow Control) and the gateway settings as they are. Confirm your
input by clicking [OK].
Figure 50: USB communication parameters
Quickstart Reference
Version 1.0.0
Application example: Starterkit880_App1_FUP.pro
45