Cleaning The Ionkey Source And Connectors - Waters Xevo G2-XS QTof Overview And Maintenance Manual

Figure 7–160: Opening the ionKey aperture
Fluid line aperture closed
Fluid line aperture open
Fluid line aperture
6. Fit a ferrule, locking ring, and compression fitting to the loose end of the fluid line.
7. Attach the fluid line to the appropriate port on the ACQUITY UPLC M-Class system, or to
the onboard IntelliStart Fluidics on the mass spectrometer (see
(Page 66)).

7.37 Cleaning the ionKey source and connectors

Required materials
• Chemical-resistant, powder-free gloves
• Lint-free tissue
• Water
• Methanol or isopropyl alcohol
• Compressed air
March 31, 2021, 715004496 Ver. 04 (previously released as Rev. D)
Page 242
Installing the ionKey source