Removing O-Rings And Seals; O-Ring Removal Kit - Waters Xevo G2-XS QTof Overview And Maintenance Manual

Figure 7–7: Source isolation valve opened
Isolation valve handle in open position
2. Close the source enclosure.

7.8 Removing O-rings and seals

You must remove O-rings or seals from instrument components when performing certain
maintenance procedures.

7.8.1 O-ring removal kit

Note:
The O-ring removal kit (700005054) is available to order separately.
Figure 7–8: O-ring removal kit
Tool 1
Tool 2
March 31, 2021, 715004496 Ver. 04 (previously released as Rev. D)
Page 99