Waters Xevo G2-XS QTof Overview And Maintenance Manual page 277

Figure B–16: Attaching the signal cable leads to the connector
Connector
Signal cables
3. Slide the clamp (with the bend facing down) into the protective shield.
4. Insert the clamp and shield (with the bend facing down) into the connection cover and
loosely tighten with one self-tapping screw.
Figure B–17: Inserting the clamp and shield
Clamp
Connection cover
Shield
5. Insert the connector with the signal cable into the connection cover and position the clamp
over the cable leads. Tighten the clamp into place with the second self-tapping screw.
March 31, 2021, 715004496 Ver. 04 (previously released as Rev. D)
Page 277