Selecting And Configuring The Nanolockspray Source; Deploying The Sprayer Platform Adjuster Assembly; Moving The Sprayer Platform Out Of The Source - Waters Xevo G2-XS QTof Overview And Maintenance Manual

4.2 Selecting and configuring the NanoLockSpray source

The Universal NanoFlow sprayer is installed as standard equipment on the NanoLockSpray
source. For installation and maintenance details, see the Universal NanoFlow Sprayer Installation
and Maintenance Guide (71500110107).
When fitted, the NanoLockSpray source is automatically recognized by the software.
Requirement:
identification of the source.
The following table summarizes how you configure the NanoLockSpray source for the various
ionization modes.
Tip:
A corona pin is not used with the NanoLockSpray source.
Table 4–1: NanoLockSpray source configuration
Sprayer type
Universal NanoFlow sprayer. See the Universal
NanoFlow Sprayer Installation and
Maintenance Guide (71500110107).
Borosilicate glass capillary NanoFlow (see
Optional glass capillary sprayer (Page
For details, see the Borosilicate Glass Capillary
Sprayer Operator's Guide Documentation CD
(715003371).

4.3 Deploying the sprayer platform adjuster assembly

4.3.1 Moving the sprayer platform out of the source

To move the sprayer platform out of the source:
Warning:
is in place over the sprayer.
1. Install the sprayer's safety cover, if necessary (see
(Page 53)).
2. Unscrew the thumbscrew on the front of the sprayer platform.
3. Pull out the side thumbscrew (on the left-hand side of the sprayer platform), and slide the
sprayer platform away from the source.
4. Release the side thumbscrew to lock the platform in the deployed position.
The sprayer platform must be inserted in the source enclosure for correct
59)).
To avoid harmless, static-like electrical shock, ensure that the safety cover
March 31, 2021, 715004496 Ver. 04 (previously released as Rev. D)
Description
For coupling to ACQUITY UPLC M-Class with
regulated flow rates down to 100 nL/min.
Suitable for single-shot analyses. This option
yields lower flow rates (<30 nL/min) than the
Universal Sprayer and, therefore, a smaller
sample consumption for a given spectral
quality.
Overview of the NanoLockSpray source
Page 56