Figure 6–4: UniSpray LockSpray source connections
LockSpray high-voltage connector (green)
Baffle motor cable (blue)
Probe adjuster cable (yellow)
Impactor pin high-voltage cable
7. Connect the baffle motor cable (blue) to the baffle motor cable socket (blue) on the mass
spectrometer.
8. Connect the probe adjuster cable (yellow) to the probe adjuster cable socket (yellow) on
the mass spectrometer.
9. Connect the impactor pin high-voltage cable to the impactor pin high-voltage cable socket
on the mass spectrometer.
March 31, 2021, 715004496 Ver. 04 (previously released as Rev. D)
Page 83