Machine General Inspection - Case WX145 Operator's Manual

SECTION 4
CHECKS BEFORE START-UP AND BEFORE EACH WORKING SHIFT
SERVICE POINTS
Machine - General inspection
Service brake
Parking brake
Upper structure holding brake
Lights
Controls and lamps functionality
Engine oil - Level
Hydraulic oil tank - Level
Fuel tank - Level
Cooling system liquid - Level
Screen washer liquid - Level
Working attachment lubrication
Greasing, off-set boom
Tyres - Pressure
Tyres - Nuts tightening

MACHINE GENERAL INSPECTION

Before operating the machine it is advisable to carry
out a general inspection of:
- Check visually the machine and working equip-
ment for possible breaks or damages to compo-
nents or to the machine structure. Should
problems be noticed, address to an authorized
workshop to have the necessary repairs done.
Replace all the damaged or worn parts with origi-
nal spares.
- Check for leaks; and if present, rectify them.
- Keep the machine clean daily from the dirt build-
up during the work.
4-10
(10 HOURS)
Check Cleaning
Copyright ©
Level check
Greasing
and top-up