Installing 5-Inch Internal Device; Where To Install 5-Inch Internal Devices - Fujitsu PRIMERGY RX600 S3 User Manual

7.7 Installing 5-inch Internal Device

This section explains how to install a 5-inch internal device unlike external devices,
an internal device does not need to be connected to the outlet because its power is
supplied from the server. In addition, it offers the advantage of saving space.
injury
Before adding a 5-inch internal device, install the OS and turn off the server.

7.7.1 Where to Install 5-inch Internal Devices

Install 5-inch internal devices in the 5-inch storage bay.
5-inch
Storage bay
• When installing or removing internal devices, turn off the server, all peripheral
devices, and any other connected devices. Also unplug all power cables from
the outlet.
Failure to do so can cause electric shock.
• Install our genuine internal devices only.
Failure to do so may cause a device failure, fire, or electric shock.
• When installing or removing internal options, make sure to remove the
screws at the specified locations only.
There is a risk of injury if screws other than those at the specified locations
are removed. This could also damage the server.
• Touch only the specified part of the printed circuit board.
Failure to do so could cause injury or damage the server.
PRIMERGY RX600 S3 User's Guide
1
2
3
4
5
6
7
8
9
223