Installing A 3.5-Inch Hdd In Hdd 1/Hdd 2 Chassis Bay; Installing 3.5-Inch Hdd In Hdd1 / Hdd2 Chassis Bay - Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua Upgrade And Maintenance Manual

HDDs and accessible drives
7.3.3 Installing a 3.5-inch HDD in HDD 1/HDD 2 chassis
bay
Ê Detach and remove the Easy rails from the desired 3.5-inch HDD installation
bay.
Align the three pins on the Easy rails with the screw holes on the new HDD.
Figure 24: Installing the Easy rail on the 3.5-inch HDD
Ê Attach an Easy rail on each side of the new HDD
84 Upgrade and Maintenance Manual
MX130 S2