Handling Sfp+ Transceiver Modules; Installing Sfp+ Transceiver Modules - Fujitsu PRIMERGY CX2550 M6 Upgrade And Maintenance Manual

Removing the defective OCP module
▶ Remove the OCP module, see
Installing the new OCP module
▶ Install the OCP module, see
Concluding steps
▶
"Installing a riser module" on page
▶
"Installing the CX2550 M6 or CX2560 M6 server node" on page
▶ Reconnect all external cables.
▶
"Switching on the server node" on page
▶
"Enabling the boot watchdog" on page
▶
"Connectors, controls, and indicators" on page
▶ Inform the customer about new MAC addresses. For more information, see
"Looking for MAC/WWN/GUID and SAS addresses" on page
▶
"Updating the NIC configuration file in a Linux and VMware environment" on
page 80.
▶
"Configuring LAN teaming" on page
6.5

Handling SFP+ transceiver modules

6.5.1

Installing SFP+ transceiver modules

Upgrade and Repair Unit
(URU)
Tools: tool-less
Expansion cards and OCP mezzanine cards
"Removing the OCP module" on page
"Installing the OCP module" on page
51.
73.
64.
Upgrade and Maintenance Manual
59.
296.
Hardware: 5 minutes
101.
98.
57.
83.
105