Removing Slot Brackets; Handling Sfp+ Transceiver Modules; Installing Sfp+ Transceiver Modules - Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

9.3.2

Removing slot brackets

Upgrade and Repair Unit
(URU)
Tools:
Phillips PH2 / (+) No. 2 screw driver
Removing a slot bracket
▶ Remove the two screws.
▶ Remove the controller from the mounting tabs on the slot bracket.
9.4

Handling SFP+ transceiver modules

9.4.1

Installing SFP+ transceiver modules

Upgrade and Repair Unit
(URU)
Tools: tool-less
The SFP+ transceiver modules are hot-pluggable.
The activation replacement depends on the system configuration. Check it with
the customer who is managing the system or the system engineer.
In addition, if the SFP+ transceiver module is independently registered as a
spare part, the SFP+ transceiver module can be replaced independently. If the
spare part unit consists of an SFP+ transceiver module and an expansion card,
replace them in the set.
RX2540 M6
Expansion cards and backup units
Upgrade and Maintenance Manual
Hardware: 5 minutes
Hardware: 5 minutes
239