Hard disk drive (HDD) / solid state disk (SSD)
7.4
2.5-inch HDD/SSD configurations
7.4.1
Overview of configurations
7.4.1.1
Configuration with up to 16 HDD/SSD modules
SAS HDDs must not be populated above or below BC-SAS/BC-SATA
HDDs. In order to avoid this configuration, please make a free bay
intentionally. For example, if only one SAS drive or one BC-SAS/BC-
SATA drive is ordered, this drive will be installed in position 0 and
position 1 will not be used.
SAS HDDs and BC-SAS/BC-SATA HDDs can be mixed as long as SAS
drives are not populated above or below BC-SAS/BC-SATA HDDs. The
same kind of HDDs can be populated above or below each other.
Figure 53: Configuration with up to 16 2.5-inch HDDs/SSDs
Position
[0]
[1]
[2]
[3]
[4]
[5]
[6]
142
HDD install order
HDD0
HDD1
HDD2
HDD3
HDD4
HDD5
HDD6
Upgrade and Maintenance Manual
ServerView RAID Manager
display name
Vendor Product (0)
Vendor Product (1)
Vendor Product (2)
Vendor Product (3)
Vendor Product (4)
Vendor Product (5)
Vendor Product (6)
RX4770 M5