Canon imageRUNNER ADVANCE C3330 Series Service Manual page 1175

CAUTION:
Be sure not to trap the Power Cable and Signal Cable during installation.
15. Connect the Signal Cable and the Power Cable to the Main Controller PCB.
• 2 Connectors
16. Install the 2 Wire Saddles to the Controller Box Frame.
17. Secure the Signal Cable and Power Cable in place using the 2Wire Saddles.
NOTE:
Fold the Power Cable at the [A] part and then secure it using the Wire Saddles.
NOTE:
• Secure the Power Cable in place using the 2 Wire Saddles.
• Secure the Signal Cable in place using the Wire Saddle.
2x
1163
1x 1x
9. Installation