Switches - Xilinx VC707 User Manual

Table 1-26: GPIO Connections to FPGA U1 (Cont'd)
FPGA (U1) Pin
AW40
AV39
8-Pole DIP Switch
AV30
AY33
BA31
BA32
AW30
AY30
BA30
BB31
User Rotary Switch
AT31
AW31
AR33
User SMA
AN31
AP31

Switches

[Figure
The VC707 board Evaluation Board includes a power and a configuration switch:
•
•
Power On/Off Slide Switch SW12
[Figure
The VC707 board power switch is SW12. Sliding the switch actuator from the Off to On
position applies 12V power from J18, a 6-pin mini-fit connector. Green LED DS16
illuminates when the VC707 board power is on. See
onboard power system.
VC707 Evaluation Board
UG885 (v1.4) May 12, 2014
Schematic Net Name
GPIO_SW_W
GPIO_SW_C
GPIO_DIP_SW0
GPIO_DIP_SW1
GPIO_DIP_SW2
GPIO_DIP_SW3
GPIO_DIP_SW4
GPIO_DIP_SW5
GPIO_DIP_SW6
GPIO_DIP_SW7
ROTARY_INCB
ROTARY_PUSH
ROTARY_INCA
USER_SMA_GPIO_P
USER_SMA_GPIO_N
1-2, callout 27 - 28]
Power On/Off Slide Switch SW12 (callout 27)
FPGA_PROG_B SW9, active-Low (callout 28)
1-2, callout 27]
Caution!
Do NOT plug a PC ATX power supply 6-pin connector into J18 on the VC707 board.
The ATX 6-pin connector has a different pinout than J18. Connecting an ATX 6-pin connector into
J18 will damage the VC707 board and void the board warranty.
www.xilinx.com
Feature Descriptions
GPIO Pin
SW7.3
SW6.3
SW2.16
SW2.15
SW2.14
SW2.13
SW2.12
SW2.11
SW2.10
SW2.9
SW10.6
SW10.5
SW10.1
J33.1
J34.1
Power Management
Send Feedback
for details on the
55