Table of Contents
Advertisement
Chapter 1: AC701 Evaluation Board Features
Table 1-24: GPIO Connections to FPGA U1 (Cont'd)
Switches
[Figure
The AC701 board Evaluation Board includes a power and a configuration switch:
•
•
Power On/Off Slide Switch SW15
[Figure
The AC701 board power switch is SW15. Sliding the switch actuator from the Off to On
position applies 12V power from J49, a 6-pin mini-fit connector. Green LED DS22
illuminates when the AC701 board power is on. See
onboard power system.
52
FPGA (U1) Pin
Schematic Net Name
User LCD male pin header
L22
M25
M24
L25
L20
L24
L23
User GPIO PMOD male pin header
P26
T22
R22
T23
1-2, callout
26
- 27]
Power On/Off Slide Switch SW15 (callout 26)
FPGA_PROG_B SW14, active-Low (callout 27)
1-2, callout 26]
Caution!
Do NOT plug a PC ATX power supply 6-pin connector into J49 on the AC701 board
The ATX 6-pin connector has a different pinout than J49. Connecting an ATX 6-pin connector into
J49 will damage the AC701 board and void the board warranty.
www.xilinx.com
LCD_DB7
LCD_DB6
LCD_DB5
LCD_DB4
LCD_E
LCD_RW
LCD_RS
PMOD_0
PMOD_1
PMOD_2
PMOD_3
Power Management
GPIO Pin
J23.1
J23.2
J23.3
J23.4
J23.9
J23.10
J23.11
J48.1
J48.2
J48.3
J48.4
for details on the
AC701 Evaluation Board
UG952 (v1.0) October 23, 2012
Advertisement
Table of Contents
