Entering Cartridges into the LSM through the PCAP
The PCAP is on the enhanced access door. The following pages describe how to enter
cartridges into the LSM through the PCAP.
When the PCAP is in Auto-mode
When the PCAP is in auto-mode:
1. Look at the indicator or display to make sure that the PCAP is not locked.
2. Unlatch and open the PCAP door
3. Insert the cartridge into the PCAP slot with the customer label on top and the
VOLSER label facing you.
4. Close the PCAP door.
Figure 3-5. Priority Cartridge Access Port—Opened
9206
(Figure
CUSTOMER
LABEL
TAPE
PRIORITY
CARTRIDGE
CARTRIDGE
INSERTION
ACCESS
DIRECTIONS
PORT
Eleventh Edition
(Figure 3-3 on page
3-8).
3-5).
VOLSER
LABEL
LSM Automatic Mode
C29451
3-11