Remote Control Models; Shift Control Removal And Disassembly - Mercury 25 EFI Service Manual

10. Install the throttle only button, grommet, and retainer.
11. Install the throttle only button retainer clip.
Description
Throttle only attaching bolts (3)
12. Install the throttle link to the throttle lever. Refer to Section 7B ‑ Tiller Handle.
13. Install the throttle cables to the throttle only pulley. Refer to Section 7B ‑ Tiller Handle.
14. Install the grommet and bottom cowl upper clamp. Refer to Section 7B ‑ Tiller Handle.

Remote Control Models

Shift Control Removal and Disassembly

1. Remove the three bolts securing the bottom cowl cover and remove the cover.
a - Bolt (3)
b - Bottom cowl cover
2. Remove the bolt securing the remote control cable clamp.
3. Remove the cotter pins and washers on the remote control throttle and shift cables.
4. Remove the cotter pins and washers on the shift rod.
90-8M0105568 eng MARCH 2016
a
e
a - Throttle lever
b - Throttle only button retainer clip
c - Grommet and throttle only button retainer
d - Throttle only button
e - Bolt (3)
b
c
d
18319
a
© 2016 Mercury Marine
Throttle/Shift Linkage
Nm lb. in.
6 53
a
b
a
18863
lb. ft.
Page 7A-15