Mercury 25 EFI Service Manual page 394

Power Trim
1. Use a hex wrench to remove the trim cylinder from the power trim assembly base by turning the cylinder counterclockwise.
2. Place the trim cylinder rod in a soft jaw vice to remove the rod eye and jam nut.
3. Loosen the jam nut.
4. Remove the rod eye and jam nut.
a - Outer cylinder tube
b - Trim cylinder rod
c - Jam nut
d - Rod eye
5. Remove paint, burrs, and sharp edges from the end of the trim rod.
Page 5B-32
a - Trim cylinder
b - Power trim assembly base
a
b
18297
a
© 2016 Mercury Marine
c
b
d
18286
90-8M0105568 eng MARCH 2016