Mercury 25 EFI Service Manual page 349

2. Remove the reverse lock link from the upper shift shaft.
a - Bushing
b - Reverse lock link
c - Reverse lock hook
d - Upper shift shaft
3. Remove the shoulder bolts securing the reverse lock hook to the swivel bracket.
4. Remove the reverse lock hook, washers on each side, and the spring.
c
Installation
1. Install the spring on the swivel housing with the spring loops placed over the bosses on the swivel bracket.
2. Slide the reverse lock hook under the hooks on the spring.
90-8M0105568 eng MARCH 2016
a
b
a
b
20830
Clamp/Swivel Bracket, Driveshaft Housing
c
a - Reverse lock hook
b - Shoulder bolt
c - Spring
© 2016 Mercury Marine
b
d
20928
Page 5A-43