Mercury 25 EFI Service Manual page 267

3. Install the oil pressure switch. Tighten the oil pressure switch to the specified torque.
a
Tube Ref No.
Loctite 567 PST Pipe
9
Sealant
Description
Oil Pressure Switch
4. Coat the water temperature sender threads with Loctite 567 PST Pipe Sealant.
5. Install the water temperature sender. Tighten the water temperature sender to the specified torque.
Tube Ref No.
Loctite 567 PST Pipe
9
Sealant
Description
Water temperature sender
6. Install a key into the camshaft.
90-8M0105568 eng MARCH 2016
a - Oil pressure switch
11795
Description
a -
a
11797
Description
Where Used
Oil pressure switch threads
Water temperature sender
Where Used
Water temperature sender threads
© 2016 Mercury Marine
Cylinder Block/Crankcase
Part No.
92-809822
Nm lb. in. lb. ft.
8 71
Part No.
92-809822
Nm lb. in. lb. ft.
22 16.2
Page 4A-25