Shift Lever Removal And Installation (Tiller Models); Shift Lever Removal - Mercury 25 EFI Service Manual

Jet Drive Outboard

Shift Lever Removal and Installation (Tiller Models)

Shift Lever Removal

1. Remove the three mounting bolts securing the access cover. Remove the access cover.
b
2. Remove the retainer that holds the bushing into the bottom cowl.
a
3. Push back the spring‑loaded stopper to expose the cross pin. Remove the cross pin and slide the shift lever out of the
bottom cowl.
Page 9A-20
b
25871
b
a
b
25874
© 2016 Mercury Marine
a - Access cover
b - Mounting bolt
a
a - Retainer
b - Shift lever
b
25872
a - Cross pin
b - Stopper
90-8M0105568 eng MARCH 2016