Mercury 25 EFI Service Manual page 88

Ignition
2. Remove the three bolts securing the flywheel cup to the flywheel.
3. Hold the flywheel in place with a flywheel holder and remove the flywheel nut.
Flywheel Holding Tool
4. Install a three point flywheel puller onto the flywheel. Do not use a jaw type puller on the ring gear.
5. Tighten the flywheel puller until the flywheel is loose from the crankshaft.
a
Flywheel Puller/Lifting Ring
6. Remove the flywheel.
Page 2A-12
a
9783
a
b
a -
b -
b
9782
© 2016 Mercury Marine
a - Bolts securing flywheel cup (3)
a - Breaker bar
b - Flywheel holder
9775
Bolts (3)
Flywheel puller
91‑52344
91‑83164M
90-8M0105568 eng MARCH 2016