Mercury 25 EFI Service Manual page 328

Clamp/Swivel Bracket, Driveshaft Housing
6. Remove the roll pin securing the upper shift shaft to the coupler.
7.
On manual tilt models:
a. Pry the bushing open and remove the reverse lock link from the bushing and reverse lock hook.
b. Remove the reverse lock link from the upper shift shaft.
a - Bushing
b - Reverse lock link
c - Reverse lock hook
d - Upper shift shaft
8. Push the upper shift shaft up through the powerhead assembly until it clears the swivel bracket. Do not pull the upper shift
shaft through the grommet.
Page 5A-22
a
b
© 2016 Mercury Marine
a
c
b
10071
c
a - Upper shift shaft
b - Coupler
c - Roll pin
b
d
20928
90-8M0105568 eng MARCH 2016