Power Trim Motor Installation - Mercury 25 EFI Service Manual

3. Use pliers or Vice Grip® pliers to secure the armature shaft before installing the motor cover.
4. Install the motor cover over the armature.
5. Secure the cover to the motor bracket with two cross slotted screws. Tighten screws to the specified torque.
Description
Motor cover screws

Power Trim Motor Installation

1. Ensure that the pump/motor coupling is installed in the pump.
b
2. Align the pump shaft tang with the slot in the pump/motor coupler.
90-8M0105568 eng MARCH 2016
a - Motor housing cover
b - Screws (2)
a
c - Armature
d - Motor bracket assembly
b
c
d
11426
a
a -
b -
c -
b
c
10961
Power trim pump
Pump assembly mounting screws (4 mm internal hex)
Pump/motor coupling
© 2016 Mercury Marine
Power Trim
17190
Nm lb. in. lb. ft.
5.2 46
Page 5B-25