Mercury 25 EFI Service Manual page 484

Tiller Handle
2. Remove the two bolts securing the carry handle end cover.
b
3. Remove the bushing from the carry handle.
4. Remove the tiller handle latch and spring.
b
a
5. Separate the tiller handle and carry handle while pulling the throttle cable ends and tiller handle stop switch wires through
the carry handle.
6. Remove the screw from the throttle shaft bracket.
7. Remove the throttle shaft bracket.
8. Loosen the throttle shaft friction control knob.
Page 7B-12
c
d
© 2016 Mercury Marine
a - Carry handle end cover
b - Bolt (2)
a
13818
a - Bushing
b - Carry handle
c - Spring
d - Tiller handle latch
13852
a b
13875
90-8M0105568 eng MARCH 2016
a - Carry handle
b - Tiller handle