Mercury 25 EFI Service Manual page 67

1. Install the steering link rod onto the steering bracket aft threaded hole.
2. Assemble the steering link rod onto the steering bracket with the bolt, two washers, spacer, and a locknut. Do not tighten
the bolt or locknut at this time.
d
c
b
a
3. Install the loose end of the steering link onto the steering cable and secure with a washer and locknut. Tighten the locknut
securely and then back the nut off 1/4 turn.
4. Tighten the link rod bolt to the specified torque.
90-8M0105568 eng MARCH 2016
e
f
59497
a -
b -
a
b
59499
59496
a - Bolt
b - Washer
c - Spacer
d - Steering bracket
e - Locknut
f - Washer
Washer
Locknut
© 2016 Mercury Marine
Outboard Installation
Page 1D-13