Mercury 25 EFI Service Manual page 329

NOTE: Clamp a Vice‑Grip ® pliers to the upper shift shaft to hold it in this position.
9.
Remove the two lower motor mounts. Refer to Lower Motor Mount Replacement, preceding.
10. Bend the tab on the locking plates.
11. Remove the nuts securing the upper motor mounts.
b
12. While holding the upper shift shaft, remove the swivel bracket/clamp bracket/steering arm assembly from the driveshaft
housing and adapter plate.
a
13. Remove the two bolts and the mount retainer securing each upper motor mount.
90-8M0105568 eng MARCH 2016
a
a
a
c
b
d
b
a -
b -
c -
d -
d
18793
a - Driveshaft housing
b - Steering arm
c - Clamp bracket assembly
d - Swivel bracket
c
18821
© 2016 Mercury Marine
Clamp/Swivel Bracket, Driveshaft Housing
a - Upper shift shaft
b - Grommet
18791
Washer
Locking plate
Nut
Bolt
Page 5A-23