Mercury 25 EFI Service Manual page 254

Cylinder Block/Crankcase
2. Remove the eight perimeter bolts in the sequential order listed.
3. Remove the eight main bearing bolts in the sequential order listed.
4. Remove the crankcase cover.
5. Identify the connecting rod position with indelible ink or paint. Do not use a scribe or a punch for identification of the
connecting rod orientation.
6. Remove the connecting rod cap bolts and the connecting rod caps.
IMPORTANT: Do not intermix the connecting rod caps with the connecting rods.
7. Remove the crankshaft.
Page 4A-12
2
6
8
4
4
8
5
1
I
© 2016 Mercury Marine
1
5
7
3
11597
3
7
6
2
11626
II
III
11627
90-8M0105568 eng MARCH 2016