Power Trim Cylinder Reassembly - Mercury 25 EFI Service Manual

Power Trim
11. Remove the O‑ring and seal from the outer trim cylinder tube.
b
12. Remove the two O‑rings from the base of the power trim assembly base.

Power Trim Cylinder Reassembly

NOTE: Replace all O‑rings and seals when reassembling the trim cylinder. Lubricate O‑rings and seals with clean Power Trim
and Steering Fluid or Automatic Transmission Fluid (ATF) (Dexron Type III) prior to installation.
Tube Ref No.
Power Trim and Steering
114
Fluid
Page 5B-34
Description
© 2016 Mercury Marine
a - Rod seal and O‑ring
b - Outer trim cylinder tube
a
18253
a
b
18251
Where Used
Power trim cylinder O-rings
90-8M0105568 eng MARCH 2016
a - O‑ring
b - Power trim assembly base
Part No.
92-858074K01