High-Speed And High-Performance Boat Operation; Outboard Remote Control Models - Mercury 40 FourStroke Maintenance And Installation Manual

Hide thumbs Also See for 40 FourStroke:
Table of Contents

Advertisement

Do not overpower or overload your boat. Most boats will carry a required
capacity plate indicating the maximum acceptable power and load as
determined by the manufacturer following certain federal guidelines. If in doubt,
contact your dealer or the boat manufacturer.
U.S. COAST GUARD CAP ACITY
MAXIMUM HORSEPOWER XXX
MAXIMUM PERSON
MAXIMUM WEIGHT
High‑Speed and High‑Performance Boat Operation
If your outboard is to be used on a high‑speed or high‑performance boat with
which you are unfamiliar, we recommend that you do not operate it at its high
speed capability without first requesting an initial orientation and familiarization
demonstration ride with your dealer or an operator experienced with your boat/
outboard combination. For additional information, obtain a copy of our
Hi‑Performance Boat Operation booklet from your dealer, distributor, or
Mercury Marine.

Outboard Remote Control Models

The remote control connected to your outboard must be equipped with a start
in neutral only protection device. This prevents the engine from starting when
the shift is actuated in any position other than neutral.
Starting the engine with the drive in gear can cause serious injury or death.
Never operate a boat that does not have a neutral‑safety‑protection device.
GENERAL INFORMATION
CAPACITY (POUNDS)
CAPACITY
!
N
WARNING
63103
2
XXX
XXX
26777
eng

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

50 fourstroke60 fourstroke

Table of Contents