Mercury 25 EFI Service Manual page 466

Throttle/Shift Linkage
4. Install the shift lever shaft into the shift detent.
d
a - Shift detent (installed on engine)
b - Shift lever shaft
c - Shift lever
d - Starter interlock lever
5. Install the shift detent spring and bolt. Tighten the bolt to the specified torque.
a
Description
Shift detent spring bolt
6. Install the upper shift shaft into the shift lever.
7. Install the starter interlock cable into the starter interlock lever.
d
8. Install the throttle only assembly to the shift lever shaft.
9. Attach the throttle only assembly to the powerhead with three bolts. Tighten the bolts to the specified torque.
Page 7A-14
c
b
b
c
c
b
a
18323
© 2016 Mercury Marine
a - Shift detent
b - Shift detent spring
c - Bolt
18333
Nm
a - Shift lever shaft
b - Starter interlock cable installed in lever
c - Starter interlock cable
d - Upper shift shaft installed in shift lever
90-8M0105568 eng MARCH 2016
a
18298
lb. in. lb. ft.
6 53