Mercury 25 EFI Service Manual page 62

Outboard Installation
3. Install the loose end of the steering link onto the steering cable and secure with a washer and locknut. Tighten the locknut
securely and then back the nut off 1/4 turn.
4. Tighten the link rod bolt to the specified torque.
5. Secure the link rod bolt so it does not loosen and tighten the locknut to the specified torque.
b
a
Description
Link rod bolt
Locknut
6. Secure the battery cables to the throttle/shift cable with two cable ties to prevent contact with the steering components.
Page 1D-8
a -
b -
a
b
59499
59500
© 2016 Mercury Marine
Washer
Locknut
a - Link rod bolt
b - Locknut
59502
Nm lb‑in.
27 –
27 –
90-8M0105568 eng MARCH 2016
lb‑ft
20
20