Propeller Shaft And Bearing Carrier Installation - Mercury 25 EFI Service Manual

Gear Housing
8. Install the pump cover on the driveshaft. Push down on the cover, rotate the driveshaft clockwise, and install the pump
cover over the impeller.
Tube Ref No.
2-4-C with PTFE
95
9. Secure the cover with screws and washers. Tighten the screws to the specified torque.
Description
Water pump cover screws

Propeller Shaft and Bearing Carrier Installation

1. Apply 2‑4‑C with PTFE to the bearing carrier O‑ring.
2. Install the bearing carrier/propeller shaft assembly into the gearcase.
Page 6A-40
a
Description
a
a
© 2016 Mercury Marine
a - Water pump cover
21036
Where Used
Inside circumference of the water pump liner
a - Screws and washers
b - Water pump cover
b
21035
Part No.
92-802859A 1
Nm lb. in.
6 53
90-8M0105568 eng MARCH 2016
lb. ft.