Mercury 25 EFI Service Manual page 345

5. Install a bushing, O‑ring, and thrust washer.
b
c
d
e
6. Align the bottom yoke on the steering shaft.
7. Warm the bottom yoke with the torch lamp.
8. Hold the steering shaft assembly.
9. Use a dead blow hammer to install the bottom yoke on the steering shaft assembly.
c
Torch Lamp
10. Install the snap ring to the steering shaft assembly.
11. Install the ground cable to the bottom yoke.
90-8M0105568 eng MARCH 2016
a
b
a
d
Clamp/Swivel Bracket, Driveshaft Housing
a - Steering arm
b - Bushing
c - O‑ring
d - Thrust washer
e - Steering shaft assembly
19865
a -
b -
c -
d -
19869
91‑63209
© 2016 Mercury Marine
Steering shaft assembly
Bottom yoke
Torch lamp
Dead blow hammer
Page 5A-39